128
ADVANCED SETTINGS
Perform the following steps to change the focus mode.
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “Focus” and then
press [X].
3. Use [S] and [T] to
select the focus mode
setting you want and
then press [SET].
An icon appears on the
monitor screen to indicate the
current focus mode.
• See the following pages of
this section for details
about shooting with each
focus mode.
Using Auto Focus
1.
Align the monitor screen’s focus frame with
the subject you want to focus and then half-
press the shutter button.
This camera will perform the focus operation.
You can tell if the image is in focus by checking the
operation lamp and the focus frame color.
Focus Mode Icon
Status Operation Lamp Focus Frame
Focusing
Complete
Lit Green Green
Not Focused Flashing Green Red
Operation Lamp
Focus Frame
To Next Page
Loading...
Need help?
General
Weight and Dimensions
