137
ADVANCED SETTINGS
You can turn on the camera’s Anti Shake feature to reduce
image blur due to subject movement or hand movement when
shooting a moving subject using telephoto, when shooting a
fast-moving subject, or when shooting under dim lighting
conditions.
Your digital camera is equipped with a CCD shift type camera
shake correction feature and a high-sensitivity anti image blur
feature. These two features work in concert to minimize the
effects of hand and subject movement.
1. In a REC mode, press [SET].
2. Use [S] and [T] to select the fifth option from
the top in the operation panel (Anti Shake).
3. Use [W] and [X] to select the setting you want
and then press [SET].
Reducing the Effects of Hand and
Subject Movement
When you want to do this:
Select this
setting:
Correct for the effects of both hand and
subject movement
Auto
Minimize the effects of hand movement
only
Camera
Shake
Increase sensitivity to minimize the
effects of subject movement only
Image
Blur
Confirm the Anti Shake effect on the
monitor screen while the shutter button is
half-pressed.
Recording is not performed when the
shutter button is pressed all the way.
• Turning off the camera cancels this
setting and changes it to the setting
that was selected before you changed
it to “ DEMO”.
DEMO
Turn off both features Off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
