118
USING BEST SHOT
You can use this procedure to shoot a portrait and then print it
out in a variety of different standard ID photo sizes.
The following are the ID photo sizes that are included on the
printout.
30 × 24mm, 40 × 30mm, 45 × 35mm, 50 × 40mm, 55 × 45mm
■ Selecting the ID Photo Scene
1. In a REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “ID
Photo” scene and then press [SET].
ID Photo will remain selected until you select a different
BEST SHOT scene.
■ Shooting an Image Using the ID Photo Scene
1. On the monitor screen,
compose the image by
positioning the subject
within the on-screen
frame and then press
the shutter button to
shoot an initial
temporary image.
• The initial temporary image is not saved in memory. The
final image is saved in memory when you perform step 3,
below.
Shooting ID Photographs
To Next Page
Loading...
Need help?
General
Weight and Dimensions
