142
ADVANCED SETTINGS
4. After the EV value is the way you want, press
[SET] to apply it.
The exposure compensation value you set remains in effect
until you change it.
IMPORTANT!
• When shooting under very dark or very bright conditions,
you may not be able to obtain satisfactory results even
after performing exposure compensation.
NOT
• Performing an EV shift operation while using multi-pattern
metering will cause the metering mode to switch
automatically to center weighted metering. The metering
mode will return to multi-pattern metering when you change
the exposure compensation value to 0.0 (page 146).
• You can use the key customization feature to configure the
[W] and [X] buttons so they control EV shift (page 154).
This comes in handy when adjusting exposure
compensation while viewing the on-screen histogram
(page 152).
Shooting on a cloudy day can give your subject a blue cast,
while shooting under white fluorescent lighting can give your
subject a green cast. White balance corrects for different types
of lighting so the colors in your images always look natural.
1. In a REC mode, press [SET].
2. Use [S] and [T] to select the third option from
the bottom in the operation panel (White
Balance).
3. Use [W] and [X] to select the white balance
setting you want and then press [SET].
Controlling White Balance
To Next Page
Loading...
Need help?
General
Weight and Dimensions
