169
VIEWING SNAPSHOTS AND MOVIES
■ Playing a Slideshow on the USB Cradle
(Photo Stand)
You can play a slideshow on the camera while it is mounted on
the USB cradle. This is a good way to enjoy a long slideshow,
without worrying about the camera’s battery going dead.
• Configure slideshow settings (page 164) before performing
the steps below.
• Connect the bundled AC adaptor to the USB cradle, and plug
it into a power outlet.
1. Turn off the camera and place it onto the USB
cradle.
2. Press the USB cradle’s
[PHOTO] button to start
the slideshow.
The slideshow is performed in
accordance with the settings
you configured with the
procedure on page 164. The
camera will turn off
automatically after the time you specified with the “Time”
setting elapses.
• You can change the slideshow setting by pressing
[MENU] while a slideshow is in progress. After
configuring the settings, press [MENU] again to restart
the slideshow.
• To adjust the level of audio volume during a slideshow,
use [S] and [T] to adjust the volume.
[PHOTO]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
