221
PRINTING
■ Printing on a Printer that Supports
PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a PictBridge or USB
DIRECT-PRINT compliant printer and print images without going
through a computer.
• The camera’s USB cradle also allows easy connection to a
printer. Before connecting to a printer via the USB cradle, be
sure to perform the following procedure first.
1. Press [MENU].
2. On the “Set Up” tab, select “USB” and then
press [X].
3. Use [S] and [T] to select the setting that suits
your printer and then press [SET].
4. Connect the USB cable that comes bundled
with the camera to the USB cradle and your
printer’s USB port.
• Also, connect the AC adaptor to the cradle and plug the
adaptor into an electrical outlet.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fully charged.
• Nothing appears on the camera’s monitor screen if the
camera is on the USB cradle while the bundled AV cable
is connected to the cradle. Be sure to disconnect the AV
cable from the cradle if you want to use the camera’s
monitor screen to view images.
For this type of printer: Select this setting:
USB DIRECT-PRINT compatible Mass Storage
PictBridge compatible PTP
USB
USB Port
USB Cable (Bundled)
Connector
Mini-B
Connector A
[ ] (USB) Connector
To Next Page
Loading...
Need help?
General
Weight and Dimensions
