256
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
• Never use your computer to modify, delete, move, or
rename any image files that are in the camera’s built-in
memory or memory card. Doing so can cause problems
with the camera’s image management data, which will
make it impossible to play back images on the camera and
can drastically alter remaining memory capacity. Whenever
you want to modify, delete, move, or rename an image, do
so only on images that have been copied to your
Macintosh.
• Never unplug the USB cable, or operate the camera or
cradle while viewing or storing images. Doing so can cause
data to become corrupted.
■ Removing the Camera from the USB Cradle
1. On your Macintosh screen, drag the camera
drive to Trash.
2. Press the USB cradle [USB] button. After
making sure that the cradle’s USB lamp is not
lit, remove the camera from the cradle.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
