278
APPENDIX
Playback
The color of the playback
image is different from what
appears on the monitor
screen when shooting.
Sunlight or light from another source may be shining directly into the lens when you are shooting. Position
the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
I can’t edit images (Layout
Print, resizing, trimming,
keystone correction, color
restoration, rotation, white
balance, date/time editing).
Note that you cannot edit the following types of imagess.
• Images created with MOTION PRINT
• Movies
• Images recorded with another camera
Other
The wrong date and time are
displayed.
The date and time setting is off. Set the correct date and time (page 211).
The messages on the display
are in the wrong language.
The wrong display language is selected. Change the display language setting (page 215).
I can’t transfer images over a
USB connection.
1) The USB cable may not be connected securely. Check all connections.
2) USB driver may not be installed. Install the USB driver (page 234).
3) The USB driver may have been installed incorrectly. Reinstall the USB driver correctly (page 234).
4) The wrong USB communication protocol may be selected. Select the correct USB communication
protocol in accordance with the type of device you are connecting (page 216).
5) If the camera is not turned on, turn it on.
Problem Possible Causes and Action
To Next Page
Loading...
Need help?
General
Weight and Dimensions
