89
SHOOTING A SNAPSHOT
1. In a REC mode, press [SET].
2. Use [S] and [T] to select the top option in the
operation panel (Recording mode).
3. Use [W] and [X] to select “A (Aperture AE)”.
4. Use [S] and [T] to
select the aperture
setting and then use
[W] and [X] to set the
aperture value you
want.
• You also can select the EV
shift setting located under
the aperture setting and
then specify an exposure
value (EV shift), if you
want.
5. Half-press the shutter button.
The camera will focus the image in accordance with your
setting.
• The shutter speed and aperture value on the monitor
screen will turn orange when you half-press shutter
button if the image is over-exposed or under-exposed.
6. When the image is focused, press the shutter
button the rest of the way to shoot.
Aperture
EV shift
A mode
To Next Page
Loading...
