60
CEEWA APP:
In Flight Interface ( ), tap One-Key Take-off icon ( ) and slide the white slider to confirm take-off.
When Drone has connected to Remote Controller:
When Drone has not connected to Remote Controller:
One-key Take-off cannot be activated. ( In Beginner Mode )
When Drone has connected to Remote Controller:
Drone will ascend to 5 meters and hover to wait for the next order.
When Drone has NOT connected to Remote Controller:
Drone cannot take off.
Step 9: Check Status
If drone hover steadily after taking-off, over ten GPS Satellites have been found, connection between Smartphone & Sports Watch
and Follow Module & Sports Watch are normal, and P Mode enables, please move to next step.
If drifts happen after hovering or warning tips show on the screen of APP and Watch, please land the drone as soon as possible.
How to land?
Press L Button, and One-Key Land activates. During landing, Remote Controller vibrates to alert.
How to react when losing control of Drone?
If something emergent occur, like losing control of drone, you could make the drone motor stop to avoid dangers.
Please be cautious to enable this function.
Once being triggered, motors would stop immediately and fall down directly.
Remote Controller:
press Power button and X Button at the same time.
To Next Page
Loading...