Ceewa S1 - Step 7: Initialization Binding

48
Turn On/Off Camera
Turn On
：
4K Camera：Press the Power Button until the LED Indicator on the screen side blinks. Camera turns on.
1080P Camera：Press the Power Button until the LED Indicators blink. Camera turns on.
Turn Off
：
4K Camera：Press the Power Button until the LED Indicator on the screen side turns off.
1080P Camera：Press the Power Button until the LED Indicators turn off.
Step 7: Initialization Binding
When should I bind Drone & Remote Controller?
During binding, please DO NOT power on any other related devices. For instance, when binding Drone &
Remote Controller, please DO NOT turn on Sports Watch and Follow Module.
How to bind?
1.
Activate Drone Binding Mode
① Insert Smart Battery.
② Place the drone upside down and turn on Smart Battery.
③ When Yellow Light of Status Indicator blinks 3 times at intervals of 0.5s, Drone Binding Mode activates.
2.
Activate Remote Controller Binding Mode
① When pressing H Button, turn on Remote Controller. Red Status LED blinks.
② Binding between Drone and Remote Controller will auto begin.
3. How to know binding is OK?
① Turn on Drone and Remote Controller at first.
② If Red Status LED is on, please finish binging procedures.
③ If Green Status LED is on, please ignore this step.