Ceragon Evolution IP-20LH - Installing and Replacing a Filter Unit; Installing the Filter Unit

Evolution® IP-20LH Installation Guide
Ceragon Proprietary and Confidential Page 56 of 101
5.5 Installing and Replacing a Filter Unit
Optionally, a filter unit can be installed in the IP-20N. The filter unit consists of
a filter tray and a filter foam. The filter foam needs to be changed or cleaned
from time to time, depending on the environmental conditions.
Follow the procedure below to install the filter unit or to remove the filter
foam.
5.5.1 Installing the Filter Unit
1 Insert the filter foam in the filter tray.