Evolution® IP-20LH Installation Guide
Ceragon Proprietary and Confidential Page 15 of 101
2.1 Slot Population Guidelines
The figures below show the 1RU and 2RU chassis slot numbers. The mapping
of the numbered slots to the different cards is described in the tables that
follow.
1RU Chassis Slot Numbering
2RU Chassis Slot Numbering
Chassis Slot Population Guidelines
1RU: The TCC is placed in slot 1.
2RU: The primary TCC is placed
in slot 1.
1RU and 2RU: Slot 2 is used to
hold Ethernet LICs.
1RU and 2RU: Slots 3 through 6
are used to hold RMCs or TDM
LICs.