Cessna 177 SERIES Service Manual

SECTION 19
EXTERIOR
PAINTING
Page No
TABLE OF CONTENTS Aerofiche/Manual
MATERIALS ........................
2F17/19-1
Priming
.........................
2F20/19-4
Application .......................
2F18/19-2 Prepainting
........................
2F20/19-4
MATERIALS .........................
2F19/19-3
Painting
Facility ........................... 2F19/19-3
Overall ......................
2F20/19-4
Application
......................
2F19/19-3
Masking
.....................
2F2019-4
Clean-up
......................... 2F20/19-4
Touch-up ....................
2F21/19-5
Prepriming ..........
.......... 2F20/19-4
Repair
of Dents .............
2F21/19-5
NOTE
This Section contains standard factory materials
listing and area of application. For paint number
and color,
refer to Aircraft
Trim Plate and Parts
Catalog.
In all cases determine
the types of
paint
on the aircraft as some types of paint are not com-
patible. Materials may
be obtained from the
Cessna
Distribution Parts (CPD).
MATERIAL NOTYPE AREA OF APPLICATION
PAINT EPOXY Used on nose gear fairing thru 1969 Models.
ACRYLIC
LACQUER Used on
aircraft exterior thru 1977 Models.
PRIMER
EX-TR-7
With
Used
with acrylic
lacquer.
T-ER-Activator
P60G2
With
Used with acrylic lacquer.
R7K46 Activator
54-2385 and 5400 Used with epoxy paint.
THINNER
T-8402A
Used to thin
acrylic lacquer
and for burndown.
T-3871 Used with epoxy paint (Du Pont)..
T-6487 Used with epoxy paint (Enmar).
SOLVENT
Methyl
Ethyl
Ketone (MEKi
Used to clean
aircraft
exterior prior
to priming.
NOTE
Do not paint Pitot Tube, Gas Caps or Antenna Covers
which were not painted at the factory.
THRU SERIAL 17702672
Change8 19-1

Cessna 177 SERIES Specifications

General

Manufacturer	Cessna
Engine Type	Piston
Wingspan	35 ft 6 in (10.82 m)
Seating Capacity	4
Number Built	4, 295
Engine	Lycoming O-360
Horsepower	180 hp
Maximum Takeoff Weight	2, 500 lb (1, 134 kg)