Cessna 177 SERIES Service Manual

(h)
ENGINE
RUN-UP.
Before
beginning
the step-by-step
inspection,
start,
run up and
shut down the
engine in
accordance
with instructions
in
the Pilot's
Operating
Handbook.
During
the run-up
observe
the following.
making
note of
any discrepancies
or
abnormalities:
1.
Engine temperatures
and pressures.
2.
Static rpm.
(Also refer
to Section 11
of this Manual.)
3.
Magneto drop.
(Also refer
to Section
11 of this Manual.)
4. Engine response
to changes
in power.
5.
Any unusual
engine noises.
6. Fuel selector
and/or
shut-off valve;
operate
engine(s) on
each tank (or
cell) position
and
OFF position
long
enough
to ensure
shut-off
and/or
selector
valve
functions
properly.
7. Idling speed and
mixture; proper idle
cut-off.
8.
Alternator
and ammeter.
9.
Suction
gage.
10.
Fuel
flow indicator.
(If
equiped)
I
After
the inspection
has been
completed,
an
engine
run-up should
again
be performed
to determine
that
any discrepancies
or abnormalities
have been
corrected.
SHOP
NOTES:
Change
7
2-19

Cessna 177 SERIES Specifications

General

Manufacturer	Cessna
Engine Type	Piston
Wingspan	35 ft 6 in (10.82 m)
Seating Capacity	4
Number Built	4, 295
Engine	Lycoming O-360
Horsepower	180 hp
Maximum Takeoff Weight	2, 500 lb (1, 134 kg)