Need help?Do you have a question about the ChargePoint CT4000 and is the answer not in the manual?
Read and follow all warnings and instructions before installation and operation to prevent injury or damage.
Information on proper product disposal and disclaimers about manual accuracy.
Mandatory installer approval and site preparation checks for CT4000 installation.
Explanation of ChargePoint's Power Management technology for managing station load.
Gathering tools and inspecting contents for pedestal mount installation.
Steps to prepare the pedestal for mounting and secure it to the base.
Instructions for installing conduit when it cannot come up from below the pedestal.
Steps for fitting and securing the main housing unit onto the pedestal.
Preparing the Cable Management Kit for installation on the pedestal.
Securing the Cable Management Kit to the pedestal housing.
Gathering tools and inspecting contents for wall mount installation.
Drilling holes and mounting brackets to the wall for the station.
Preparing the Cable Management Kit for installation on the wall mount.
Securing the CMK and fitting the housing onto the wall mount brackets.
Steps for removing knockouts and installing conduit into the housing.
Reviewing electrical input/output and wiring diagrams for proper connection.
Detailed steps for connecting wires to the terminal blocks for both station types.
Procedure for verifying correct input voltages at the terminal block.
Assembling the top cap and connecting the head assembly to the station.
Powering up the station and installing cable management clamps.
Using the wizard for setup and securing the head assembly post-wiring.
Using a smartphone app or mobile site to register the station's precise location.
Performing a test charge to verify station functionality.
Checklist to ensure all installation steps and requirements are met before completion.
Details on warranty exclusions, disclaimers, and limitations of liability.
General| Model | CT4000 |
|---|---|
| Connector Type | SAE J1772 |
| Voltage | 208-240 VAC |
| Amperage | 30A |
| Display | LCD |
| Connectors per Station | 1 or 2 |
| Enclosure Rating | NEMA 3R |
| Authentication | RFID, Mobile App |
| Cable Length | 18 feet |
| Ingress Protection Rating | IP54 |
| Category | Electric Vehicle Charging Station |
| Output Power | 7.2 kW |
| Network Connectivity | WiFi, Ethernet, Cellular |
| Mounting Options | Wall, Pedestal |
| Operating Temperature | -30°C to 50°C |
| Warranty | 3 years |
To Next Page
