Chore-Time Chore-Tronics 3 Control - Control Setup; General and Unit Settings

Control Setup
Control Setup Chore-Tronics® 3 Control
18
MT2398C
General Setup
From any screen select the Main Menu button at the top left of the screen.
1. Select the Setup button.
3. From the Setup/General screen select
Settings .Setup/General/Settings screen.
2. Select the General button to access the
Setup/General screen.
4. Enter the Computer Number. This will be your house number.
5. Enter the House Name. The house name can be whatever you want, it will be displayed at the
top right of ever screen. A maximum of 14 digits.
6. Choose the Language by pressing the dropdown and select English or Spanish.
7. Choose the Clock Type by pressing on the dropdown and select 12 hour or 24 hour clock.
8. Set the Time of Day by pressing on the time box, a numeric keypad will open allowing you to
set the time of day. (See following page).
9. Set the Date by pressing the date box, a numeric keypad will open allowing you to set the date.
Follow the same procedure used to set the Time (See Following Page).
10. The IP, IP mask and Gateway are used only if C-Central, WebLink and or C-Collect are in use.
These settings are determined by the local network settings.
Note: Path to the Screen being viewed
4
5
6
7
8
9
10