Chore-Time Chore-Tronics 3 Control - Page 45

Control Setup Chore-Tronics® 3 Control
45
MT2398C
Ventilation-Heat Zones
1. Select the Heat Zones button.
3. Assign Relays, Sensors, Mode values and
Names just as you did for Tunnel Fans. (See pre-
vious)
3. Select the Control Tab.
4. Select the box if you do not want the Heat
Zones to run in Tunnel assist.
1. Select the Ventilation button.
Curtain
1. Use the Back button to get to the Setup/Out-
puts screen and push the Curtain Button.