Dual-input 3D image formats
The following dual-input 3D image formats are supported, where HDMI Input 1 = left eye and HDMI
Input 2 = right eye. Frame rate is expressed per eye in the following table.
Format Cables Frame rate (Hz) Sampling Bit-depth
HD 1280x720 2 24, 25, 30, 50, 60 Y'C'
B
C'
R
/RGB/4:4:4
Y'C'
B
C'
R
/4:2:2
8/10/12 bpc
1920x1080 2 24, 25, 30, 50, 60 Y'C'
B
C'
R
/RGB/4:4:4
Y'C'
B
C'
R
/4:2:2
8/10/12 bpc
2048x1080 2 24, 25, 30, 50, 60 Y'C'
B
C'
R
/RGB/4:4:4
Y'C'
B
C'
R
/4:2:2
8/10/12 bpc
4K 3840x2160 2 24, 25, 30 Y'C'
B
C'
R
/RGB/4:4:4 8/10 bpc
3840x2160 2 24, 25, 30 Y'C'
B
C'
R
/4:2:2 8/10/12 bpc
3840x2160 2 50, 60 Y'C'
B
C'
R
/RGB/4:4:4 8 bpc
3840x2160 2 50, 60 Y'C'
B
C'
R
/4:2:2 8/10/12 bpc
4096x2160 2 24, 25, 30 RGB/4:4:4 8/10 bpc
4096x2160 2 24, 25, 30 Y'C'
B
C'
R
/4:2:2 8/10/12 bpc
4096x2160 2 50, 60 Y'C'
B
C'
R
/RGB/4:4:4 8 bpc
4096x2160 2 50, 60 Y'C'
B
C'
R
/4:2:2 8/10/12 bpc
SDI video source
F
or the projector to accept digital video data from 12G, 6G, 3G, or HD/SD SDI video source, plug the
source directly into the Video Input panel.
The input configurations listed below are supported.
Input configuration Description
Single-link Accepts connection of 12G, 6G, 3G, and HD/SD SDI input standards.
Dual-link Accepts connection of dual-link 6G, 3G, and HD SDI input standards.
Quad-link Accepts connection of quad-link 6G or 3G SDI input standards.
SDI video formats
Each of the SDI inputs supports the following single-Link 2D SD and HD image formats, single-Link 2D
HD and UHD/4K image formats, dual-link 2D SDI image formats, and quad-link 2D image formats.
Fractional 1/1.001 frame rates, 1920 x 1080 (HD), and 3840 x 2160 (UHD) formats are also supported.
Single-link 2D image formats
The following single-link 2D SDI image formats are supported.
Video Input panel
CineLife+ User Guide 27
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
