Deleting a screen file
Delete a screen file when it is no longer required.
1.
In the left navigation menu, select Image Settings > Screen File Setup.
2. In the Screen File list, select the screen file you want to delete.
3. Select Delete.
4. To confirm the deletion, select Delete.
Activating a warp file
Activ
ate a warp file to use with a selected channel.
Warp files provide image configuration information to support projection in environments with multiple
projectors and complex screen shapes. Warp files are created using an automated process through
Christie Mystique.
For more information on using Christie Mystique in a cinema environment, see the Mystique User
Guide—Cinema Edition (P/N: 020-001240-XX).
1. Using Christie Mystique, create the required warp file.
2. Using Mystique, upload the warp file to the projector.
3. On the projector touch panel, navigate to Image Settings > Warp File Setup.
4. To activate the warp file, find the file name in the Warp File list and select Activate.
If you no longer require a warp file, remove it by selecting Image Settings > Warp File
Setup. Find the w
arp file in the list and select Delete.
Adjusting the image size and position
CineLife+ User Guide 85
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
