Format Cables Frame rate
(Hz)
Sampling Bit-depth
1280x960 1 60 RGB 8bpc
1280x1024 1 60 RGB 8bpc
1440x900 1 60 RGB 8bpc
1680x1050 1 60 RGB 8bpc
1600x1200 1 60 RGB 8bpc
1920x1200 1 60 RGB 8bpc
Integrated Media Block (IMB) video source
Connect a compatible device to either the S2 or S4 interface of the projector to send digital video data
from an Integr
ated Media Block (IMB) to the projector.
The IMB input configurations listed below are supported.
Input configuration Description
IMB S2 or S4 Enables connection of MPEG-2 video formats.
Enables connection of MPEG-2 MXF interop video formats.
Enables connection of SMPTE-compatible 2D and 3D video formats
Contact Christie Technical Support to learn which S2 and S4 IMB devices are compatible with Christie
projectors.
Series 2 Integrated Media Block (IMB) video formats
S2 Integr
ated Media Block (IMB) video format support is determined by the IMB make and model.
Refer to the associated IMB documentation to understand which of the following video signals are
supported.
All MPEG-2 content is converted in the media block to RGB 4:4:4 8-bit before play out.
MPEG image formats
Format Resolution Max frame
rate 2D
Max frame
rate 3D
Min frame
rate
Bit-depth
VGA 640x480 120.0 120.0 23.0 8-bits
525 4SIF 704x480 120.0 120.0 23.0 8-bits
525 SD 720x480 120.0 120.0 23.0 8-bits
4CIF 704x576 120.0 120.0 23.0 8-bits
625 SD 800x600 120.0 120.0 23.0 8-bits
SVGA 1024x768 79.6 79.6 23.0 8-bits
XGA 1024x768 79.6 79.6 23.0 8-bits
Video Input panel
CineLife+ User Guide 42
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
