Field Name Description
Christie Pureformity
Color
™
Correction File
The color correction file associated with the channel.
Bypass (Default)
Warp File Warp file associated with the channel.
Bypass (Default)
4. Select Save.
Adding a channel for SDI input
Create a channel to store customiz
ed projector settings for input devices connected to the SDI port.
1. In the left navigation menu, select Channel Setup.
2. Select + Add Channel.
3. Complete these fields:
Field Name Description
Name Channel name
Input Type Select the input signal sources from one of the following:
•
SDI - 1
• SDI - 2
• SDI - 3
• SDI - 4
• SDI - Dual-Link (1,2)
• SDI - Dual-Link (3,4)
• SDI - Quad-Link (2SI)
• SDI - Quad-Link (SQ Div)
• SDI 3D LR (1,2)
• SDI 3D LR (3,4)
• SDI - Dual-Link 3D LR (1,2)(3,4)
Data Format Bit-depth, sampling format, and color space of the input signal are
automatically determined from the metadata carried in the source.
Auto (Default)
Scan Type Determines the input scanning format. Select one of the following:
• Auto (Default)—The scanning format of the input signal (interlaced or
progressive) is automatically determined from the metadata carried in the
source or by measuring scanning parameters of the source.
• Progressive—Forces the input signal scanning format to progressive,
overriding any metadata in the input signal.
3D Sync Input Mode Specifies whether a specific frame of input data has left-eye or right-eye data.
Select one of the following:
Working with channels
CineLife+ User Guide 73
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
