4. In the Source Media Resolution area, adjust the width and height of the source media.
5.
Select an aspect ratio or enter a custom aspect ratio for the source media.
6. In the Position area, adjust the horizontal and vertical position of the source media.
7. Select Save
.
Editing source file settings
Edit source file settings when the settings of the input device change.
1.
In the left navigation menu, select Image Settings > Source File Setup.
2. In the Source File list, select a source file.
3. Modify the source file settings.
4. Select Save.
Copying existing source file settings to a new
source file
T
o duplicate existing source file settings quickly, copy the settings of an existing file to a new source
file.
1. In the left navigation menu, select Image Settings > Source File Setup.
2. In the Source File list, select the source file you want to copy.
3. Select Save As.
4. Enter a name for the source file and select Save.
Deleting a source file
Delete a source file when it is no longer required.
1.
In the left navigation menu, select Images Settings > Source File Setup.
2. In the Source File list, select the source file you want to delete.
3. Select Delete.
4. To confirm the deletion, select Delete.
Creating a screen file
Use screen files to define the siz
e of the display panel and image cropping. You can assign the same
screen file to multiple input devices.
1. In the left navigation menu, select Image Settings > Screen File Setup.
2. Select Create Screen File.
Adjusting the image size and position
CineLife+ User Guide 83
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
