SKA-3D actions
The following built
-in commands are available for SKA-3D devices:
Command Description
Set Audio Input Channel Sets the audio input channel.
Mute On/Mute Off Enables or disables muting.
Set Master Volume Sets the overall volume for the system.
Set Video Input Channel Sets the video input channel.
Active Trigger Input Controls eight SKA-3D presets.
T
o use this command, a trigger input must be associated with each of the SKA-3D
presets
Creating a macro
Create a macro to mak
e the projector perform a specific list of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the right pane, select Create New Macro.
3. Enter a name for the macro.
The Name field cannot contain spaces.
4.
Select the macro type.
5. Select Create.
6. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation or Projector, select the action item.
7. To save the macro, select Save.
8. To test the macro, select Test.
Running a macro
R
un a macro to have the projector perform a specific list of actions.
1. In the right toolbar of the touch panel, select Run Macro.
2. Select a macro.
Automation
CineLife+ User Guide 97
020-103073-10 R
ev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
To Next Page
Loading...
