Chroma 19020 User Manual

Multi-Channel Sync Hipot Tester 19020/19020-4/19021/19021-4/19022/19022-4
User’s Manual
4-14
4.4.7 Setting CALIBRATION
In SYSTEM screen, move the highlight to CALIBRATION and press ENTER to go to
CALIBRATION setting screen as shown below:
When in CALIBRATION screen, press keys to set the related functions.
The following table lists the setting items of CALIBRATION and their descriptions.
Setting Items
Password
Description
Enter into Calibration Mode
7931
Please refer to Chapter 7 Calibration
Procedure for related info.
Clear the settings and test
procedures in memory
85246
This function will clear all settings and test
procedures in memory and return to factory
default.
4.4.8 Setting ERROR LOG
In SYSTEM SETUP screen, move the highlight to ERROR LOG and press ENTER to go to
ERROR LOG screen as shown below:
When in ERROR LOG screen it will show the error message generated during connection.
The ERR box will return to normal without reverse when in ERROR LOG screen.
CALIBRATION
CAL. PASSWORD
︰
■
EXIT
REMOTE
LOCK
CORR
ERROR
ERROR LOG
1. +0
，
No error
EXIT
REMOTE
LOCK
CORR
ERROR

Chroma 19020 Specifications

General

Brand	Chroma
Model	19020
Category	Test Equipment
Language	English