Multi-Channel Sync Hipot Tester 19020/19020-4/19021/19021-4/19022/19022-4
User’s Manual
2. Use 1 2 3 4 4 5 6 7 8 9 0 to select the character for entering the
memory name. Then use the numeric/character keys to enter the memory name. Press
one numeric/character key repeatedly can switch the number and English letter display
in cycle. Pressing Function Key [NEXT CHAR] to move the cursor to the next character
position can use the same number/character key to enter the name in sequence.
3. Press ENTER, a confirmation dialog box will appear for save.
4. Press Function Key [YES] to confirm it or press Function Key [NO] to cancel it.
If there is data in the memory, it will be overwritten when save. Make sure
it is ok to do so before save.
4.6.3 Deleting Memory
Follow the steps below to delete the programs from memory:
1. Use ▲, ▼ to move the highlight to the memory to be deleted and press Function Key
[DELETE].
2. A delete confirmation dialog box is prompted. Press Function Key [YES] to confirm it or
press Function Key [NO] to cancel it.
To Next Page
Loading...
