Operation
4.6.4 Recalling Memory
Follow the steps below to recall the programs stored in memory:
1. Use ▲, ▼ to move the highlight to memory to be recalled and press Function Key
[RECALL].
2. A recall confirmation dialog box is prompted. Press Function Key [YES] to confirm it or
press Function Key [NO] to cancel it.
4.7 Using OFFSET or GET Cs
4.7.1 How to Get in OFFSET or GET Cs Screen
1. Select OFFSET or GET Cs operation in TEST screen as shown below:
OSC
2. Press Function Keys [OFFSET] or [GET Cs] to select the desired function. If these two
keys are grayed out, it means they are invalid here.
To Next Page
Loading...
