Operation
4.6 Managing Memory for Programs
4.6.1 Entering Memory Screen
1. Press MAIN INDEX in any screen will appear the following:
2. When “MAIN INDEX” shows on the title bar, press ▲, ▼ to move the highlight to
[STORE/RECALL] and press ENTER to go to the setting screen as shown below:
3. Use ▲, ▼ to move the highlight to the memory to be processed and follow the
instruction of Function Key to read, save or erase that memory.
4. The number in parentheses means the test steps contained in the memory.
4.6.2 Saving Memory
Follow the steps below to save the set program data to memory:
1. Use ▲, ▼ to move the highlight to the memory to be saved and press Function Key
[STORE].
To Next Page
Loading...
