Chroma 3300 - 2.2 Test Signals; 2.3 Measurement Range

Automatic Transformer Test System 3300/3302 User’s Manual
2-2
 Measurement terminals: Four-terminal pair for L, C, R, ｜ Z ｜ , DCR.
Six-terminal pair for Turn-Ratio.
 Integration Time: Fast, Middle and Slow.
2.2 Test Signals
 Frequency:
3300,3302 : 20 〜 1MHz
Accuracy : ± (0.01% ± 0.01Hz)
 Signal Level:
Range Setting Accuracy
Voltage 10mVrms to 2 Vrms
± (10% ＋ 1mVrms)
 Output Impedance: 100 Ω , ± 3% （ CONST Rsou.: 320X ）
 Test Signal Level Monitor:
Mode Range Accuracy
Vo lt a g e
1
10mVrms to 2 Vrms
±（ 3% of reading ＋ 0.5mVrms ）
1
: Add the impedance measurement accuracy (%) to the voltage level monitor
accuracy when the DUT’s impedance is < 100 Ω .
2.3 Measurement Range
Parameter Range
｜ Z ｜ , R, X
0.1 mΩ to 999.999 MΩ
｜ Y ｜
0.1 nS to 99.9999 S
C 0.001 pF to 999.99 mF
L 0.1 nH to 9.9999 kH
D 0.0001 to 99999
Q 0.0001 to 99999
θ
-90.00 ° to 90.00 °
△ %
-100.00% to 100.00 %
DCR 0.01 mΩ to 99.999 kΩ
Np/Ns 100 : 1
Vs 10V max