Chroma 3300 - Recall the Data from the Memory; Store the Data into Memory

Automatic Transformer Test System 3300/3302 User’s Manual
4-12
4.3.3 Recall The Data From The Memory
1. In the SYSTEM SETUP condition press [RECALL] to enter that recall the data which
store in memory to use, now screen shows as below:
When enter this screen then into the "RECALL MEMORY", at this time just press number
key to input which item then press [Enter].
All the items are number, the range is from 0 〜 159, 160 items, but inside 0 〜 20 items are
interior memory of instrument, 26 〜 159 are the data from external memory card.
If the recall data successfully, then screen will show RECALL: 1?
But if has not data in the memory which we chose, then the screen shows the words and pause
the screen "NO DATA TO LOAD".
Exterior memory card can boundless extend, each memory can store 135 items data, exterior
memory card is option.
4.3.4 Store The Data Into Memory
In SYSTEM SETUP condition press [STORE] key can set the function that store data into the
memory, the screen shows below:
When enter this screen into "DATA STORE MEMORY" function, press number keys and
input the item number which we intend to input then screen will show STORE: 1?
All the items are number, the range is from 0 〜 159, 160 items, but inside 0 〜 20 items are
interior memory of instrument, 26 〜 159 are the data from external memory card.