Chroma 3300 - 4.4.12 LCRZ Parameter Analysis. (3302 only)

109 pages

Save Page as PDF

To Next Page

To Previous Page

Panel Description

4-39

4.4.12 LCRZ Parameter Analysis. (3302 only)

1. Turn the power on, the instrument shows every things OK, press [Meas Display] to enter

the LCRZ component parameter test.

Main Page

Table of Contents5
Introduction7
General7
Brief Specifications8
Incoming Inspection9
Specifications11
Measurement Functions11
Test Signals12
Measurement Range12
Measurement Accuracy13
Accuracy13
Correction Functions15
List Sweep (3302 Only)16
Comparator Function (3302 Only)16
Interfaces16
Others16
Installation17
Ambient Environment17
Power-Line Connection17
Fuse18
Power Regulation18
Connecting Unknown18
The Contrast of LCD Display18
Panel Description19
Front Panel Description19
Rear Panel Description22
System Parameters Setting Description24
System Configuration24
System Time Setting Description29
Recall the Data from the Memory30
Store the Data into Memory30
Memory Management Instruction31
User Password Setting31
Scan Test Box (Box Test)32
Memory Card Management Function32
Print Testing33
Setup33
Operation Instruction34
Open Test34
Short Test36
Single Transformer Test38
Test Fixture (Scan Box) Operation42
Test Procedure Description52
Different Frequency Setting in the Different Windings52
ACR Setting Description53
Zx. Setting Description54
Pins Parallel Test Description55
Pins Series Test Description55
How to Set up 〝 D EVIATION 〞 F Unction56
LCRZ Parameter Analysis. (3302 Only)57
Compare Test (3302 Only)58
BIN SET (3302 Only)58
Multi-Frequency Scan Test (LIST SWEEP) (3302 Only)59
Upload Calibration Explanation (3302 Only)62
33XX Fast Function Keys (Help Function)63
33XX DCA New Additional Function & Operation (Option)63
Low Impedance Measurement Application64
Bias Current Source Connecting65
Test Application65
Large Inductance Measurement65
Low Coupling Coefficient Turn Ratio Measurement65
Bias Current Connecting65
Nonlinear Inductor, Transformer Measurement65
Application of Interface67
Transformer Automatic Scan Interface (Scan Box)67
Description the Test Function67
Notice before Using67
Scan Box Front Panel Description68
Scan Box Rear Panel Description70
Scan Box Description71
Test Fixture (Scan Box) Description72
PRINT(OPTION) Operational Procedure91
Handler Interface (Option)97
General97
Timing98
RS-232C Control Interface99
Overview99
RS-232C Specification99
RS-232C Interface Connector99
Table of RS-232C Signal Line and Pin99
Setting 33XX RS-232C Interface99
Setting BAUD RATE100
Setting PARITY CHECK100
Setting WORD LENGTH100
Setting of DEFAULT100
On/Off100
Setting 33XX RS-232C Interface100
Data Output Format for 33XX103
Transformer Output Format103
Data Output Format for LCR (3302 Only)104
LCR Pure Value Output Format104
BIAS SCAN Output Format105
Example Programs of RS-232C Interface Control106
Additional Description of Memory Card109

Chroma 3300 - 4.4.12 LCRZ Parameter Analysis. (3302 only)

Table of Contents

Related product manuals