Remote Operation
CONFigure:VOLTage:SIGN
Type: Channel-Specific
Description: Set the sign of voltage measurement to Plus/Minus.
Setting Syntax: CONFigure:VOLTage:SIGN<space><CRD | NR1>
Setting Parameters:<CRD | NR1>, PLUS(0), MINUS(1)
Setting Example: CONF:VOLT:SIGN PLUS Set sign of voltage to Plus.
CONF:VOLT:SIGN 1 Set sign of voltage to Minus.
Query Syntax: CONFigure:VOLTage:SIGN?
Return Parameters:<CRD>, PLUS, MINUS [Unit = None]
Query Example: CONF:VOLT:SIGN?
CONFigure:WINDow
Type: Channel-Specific
Description: Set the time of measure over which the window calculation is to be
performed.
Setting Syntax: CONFigure:WINDow<space><NRf+>
Setting Parameters:<NRf+>, 0.001s ~ 10.000s, Resolution = 1ms, Unit = Second
Setting Example: CONF:WIND 0.5 Set times of window = 0.5s
CONF:WIND MAX Set times of window = maximum value.
CONF:WIND MIN Set times of window = minimum value.
Query Syntax: CONFigure:WINDow?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Second]
Query Example: CONF:WIND?
CONF:WIND? MAX
CONF:WIND? MIN
CONFigure:LVP
Type: Channel-Specific
Description: Set the action type of LVP.
Setting Syntax: CONFigure:LVP<space><CRD | NR1>
Setting Parameters: <CRD | NR1>, OFF(0), ON(1)
Setting Example: CONF:LVP OFF Set LVP function to OFF.
CONF:LVP 1 Set LVP function to ON.
Query Syntax: CONFigure:LVP?
Return Parameters: <CRD>, OFF, ON [Unit = None]
Query Example: CONF:LVP?
CONFigure:ENTer:KEY
Type: Channel-Specific
Description: Set the action type of ENTER key.
Setting Syntax: CONFigure:ENTer:KEY<space><CRD | NR1>
Setting Parameters: <CRD | NR1>, NEXT(0), FIXED(1)
Setting Example: CONF:ENT:KEY NEXT Set ENTER key function to NEXT.
CONF:ENT:KEY 1 Set ENTER key function to FIXED.
Query Syntax: CONFigure:ENTer:KEY?
Return Parameters: <CRD>, NEXT, FIXED [Unit = None]
Query Example: CONF:ENT:KEY?
CONFigure:SHORt:KEY
Type: Channel-Specific
Description: Set the action enable or disable of SHORT key.
Setting Syntax: CONFigure:SHORt:KEY<space><CRD | NR1>
Setting Parameters: <CRD | NR1>, DISABLE(0), ENABLE(1)
Setting Example: CONF:SHOR:KEY DISABLE Set SHORT key function to