Chroma 63600 Series User Manual

Remote Operation
5-85
SPECification:UNIT
Type: Channel-Specific
Description: Set the specific entry mode.
Setting Syntax: SPECification:UNIT<space><NRf>
Setting Parameters:<NRf>, VALUE(1), PERCENT(0)
Setting Example: SPEC:UNIT VALUE
SPEC: UNIT 0
Query Syntax: SPECification:UNIT?
Return Parameters:<CRD>, VALUE, PERCENT
Query Example: SPEC:UNIT?
SPECification:VOLTage:C
Type: Channel-Specific
Description: Set the center-level voltage specification. The -1 mean don’t care.
Setting Syntax: SPECification:VOLTage:C<space><NRf+>[suffix]
Parameters: Refer to respective specification for valid value range.
Setting Example: SPEC:VOLT:C 20
SPEC:VOLT:C 20mV
Query Syntax: SPECification:VOLTage:C?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Volt]
Query Example: SPEC:VOLT:C?
SPEC:VOLT:C? MAX
SPEC:VOLT:C? MIN
SPECification:VOLTage:H
Type: Channel-Specific
Description: Set the high-level voltage specification. The -1 mean don’t care.
Setting Syntax: SPECification:VOLTage:H<space><NRf+>[suffix]
Parameters: Refer to respective specification for valid value range.
Setting Example: SPEC:VOLT:H 20
SPEC:VOLT:H 20mV
Query Syntax: SPECification:VOLTage:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Volt]
Query Example: SPEC:VOLT:H?
SPEC:VOLT:H? MAX
SPEC:VOLT:H? MIN
SPECification:VOLTage:L
Type: Channel-Specific
Description: Set the low-level voltage specification. The -1 mean don’t care.
Setting Syntax: SPECification:VOLTage:L<space><NRf+>[suffix]
Parameters: Refer to respective specification for valid value range.
Setting Example: SPEC:VOLT:L 20
SPEC:VOLT:L 20mV
Query Syntax: SPECification:VOLTage:L?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Volt]
Query Example: SPEC:VOLT:L?
SPEC:VOLT:L? MAX
SPEC:VOLT:L? MIN

Chroma 63600 Series Specifications

General

Series	63600
Operating Temperature	0°C to 40°C
Modes	CC, CV
Interface	GPIB, USB
Protection	OCP, OTP, OVP
Voltage Resolution	1mV
Cooling	Forced Air