Chroma 63600 Series - Page 216

Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5-84
SPECification:POWer:C
Type: Channel-Specific
Description: Set the center-level power specification. The -1 mean don’t care.
Setting Syntax: SPECification:POWer:C<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:C 10
SPEC:POW:C 10mW
Query Syntax: SPECification:POWer:C?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:C?
SPEC:POW:C? MAX
SPEC:POW:C? MIN
SPECification:POWer:H
Type: Channel-Specific
Description: Set the high-level power specification. The -1 mean don’t care.
Setting Syntax: SPECification:POWer:H<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:H 10
SPEC:CURR:H 10mW
Query Syntax: SPECification:POWer:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:H?
SPEC:POW:H? MAX
SPEC:POW:H? MIN
SPECification:POWer:L
Type: Channel-Specific
Description: Set the low-level power specification. The -1 mean don’t care.
Setting Syntax: SPECification:POWer:L<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SPEC:POW:L 10
SPEC:POW:L 10mW
Query Syntax: SPECification:POWer:H?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Watt]
Query Example: SPEC:POW:L?
SPEC:POW:L? MAX
SPEC:POW:L? MIN
SPECification:TEST
Type: All Channels
Description: Start or close the all channel specification test.
Setting Syntax: SPECification:TEST<space><NRf>
Setting Parameters:<NRf>, OFF(0), ON(1)
Setting Example: SPEC:TEST ON
SPEC:TEST 0
Query Syntax: SPECification:TEST?
Query Example: SPEC:TEST?
Return Parameters:<CRD>, OFF, ON