202
Enter Setup
1663 Barcode Scanner User Guide
Enter Setup
Download
5) Run the download utility “ProgLoad.exe” on your computer.
Kernel Program
User Program
K1663_V*.shx STD1663_V*.shx
For the communication settings, select
“RS-232” and the correct COM port for USB
Virtual COM interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
6) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 3 (= USB Virtual
COM).
To Next Page
Loading...
