1.10 READ REDUNDANCY FOR ALL SYMBLOGIES
Select the level of reading security. For example,
If "No Redundancy" is selected, one successful decoding will make the reading valid
and induce the "READER Event".
If "Two Times" is selected, it will take a total of three consecutive successful decoding
of the same barcode to make the reading valid. The higher the reading security is
(that is, the more redundancy the user selects), the slower the reading speed gets.
It is obvious that the more redundancy selected, the higher the reading security is, and
thus, the slower the reading speed becomes. It has to compromise between reading
security and decoding speed.
*No Redundancy
One Time
Two Times
Three Times
To Next Page
Loading...
Need help?
General
