CipherLab 1663 User Manual (English)

To Next Page

To Previous Page

Update

Chapter 1

Understandin

he Barcode Scanner

Decoding Data and Time

Year Setup

Date Setup

Time Setup

1) Read the barcode above to apply time or date code separately, and follow steps 2~3.

2) Read the “

Decimal Value” barcode on page 219 for the desired character string. For

example:

Year: Read “2”, “0”, “1”, “1” for the year setting as year=2011.

Date: Read “1”, “1”, ”2”, “0” for the date setting as date=Nov.20.

Time: Read “1”, “8”, “5”, “9” for the time setting as time=18:59.

3) Read the “Validate” barcode for each setting on the same page.

1.16.2 SEPARATOR FOR DATE AND TIME

The Date and Time can be split with a pre-selected separator, for example, “/” as

YYYY/MM/DD or “:” as HH:MM:SS

Separator for

Date/Time

*“-”

Separator for

Month/Date

*“/”

Separator for

Hour/Minute

*“:”

1) Read the barcode above to apply separator to date or time separately, and follow

steps 2~3.

2) Read the “

Hexadecimal Value” barcode on page 220 for the desired character string.

For example, read “3” and “A” for the separator to split the data with character [:].

3) Read the “Validate” barcode on the same page to complete this setting.

Need help?

Do you have a question about the CipherLab 1663 and is the answer not in the manual?

CipherLab 1663 Specifications

General

Scanning Technology	Laser
Scan Pattern	Single Line
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Connectivity Technology	Bluetooth
Interface	USB, RS232
Light Source	Laser Diode
Battery	Rechargeable Li-ion battery
Supported Symbologies	UPC, EAN, Code 39, Code 128, Interleaved 2 of 5, etc.
Power Supply	USB
Operating Temperature	0 to 50°C
Storage Temperature	-20°C to 60°C