CipherLab RS30 - Page 151

137
CCD (SM1)
Interleaved 25
Interleaved 25 Switch to enable Interleaved 2 of 5 decoding. Enable
Length option Sets the length of the Interleaved 2 of 5 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Verify Check Digit Decide whether to verify the check digit. If
desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Disable
Transmit Check Digit
Decide whether to include the check digit in the data being
transmitted.
Disable
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar-14 Switch to enable GS1 DataBar-14 decoding. Enable
GS1 DataBar Limited
GS1 DataBar Limited Switch to enable GS1 DataBar Limited decoding. Enable
GS1 DataBar Expanded
GS1 DataBar Expanded Switch to enable GS1 DataBar Expanded decoding. Enable
MSI
MSI
MSI Switch to enable MSI decoding. Enable
Length option Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Verify Check Digit
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
One Check
Digit
Transmit Check Digit
Decide whether to include the check digit in the data being
transmitted.
Disable