142
RS30 Mobile Computer Reference Manual
Check Digit Option
Sets whether to verify check digits according to the selected
option. If the check
digits are incorrect, the barcode will not
be accepted.
Disable
One Check Digit
Two Check Digits
Disable
Transmit Check Digit
Selects whether to include check digits in the transmitted
data.
Check Digit Option” must be enabled.
Disable
Length option Sets the length of the Code 11 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Code 39 Enable
Code 39 Switch to enable Code 39 decoding. Enable
Trioptic Code 39 Selects whether to decode Trioptic Code 39.
Trioptic Code 39 is a variant of Code 39 used in the marking of
computer tape cartridges. It always contains six characters.
Enable
Convert to Code 32
Selects whether to convert decoded data to Italian
Pharmacode.
Enable
Code 32 Prefix Prefix character “A” to Code 32 barcodes.
“Convert to Code 32” must be enabled for this to function properly.
Disable
Verify Check Digit Selects whether to verify the
Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Disable
Transmit Check Digit
Decide whether to include the check digit in the data to
transmit.
“Verify Check Digit” must be enabled.
Disable
Support Full ASCII Sel
ects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII character set.
Disable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Code 93 Enable
Code 93 Switch to enable Code 93 decoding. Enable
To Next Page
Loading...
