CipherLab RS30 - Page 157

143
Laser (SE955)
Length option Sets the length of the Code 93 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
CODE 128
Code 128 Enable
Code 128 Switch to enable Code 128 decoding. Enable
GS1-128 Enable
GS1-128 Switch to enable GS1-128 decoding. Enable
ISBT 128 Enable
ISBT 128 Switch to enable ISBT 128 decoding. Enable
CODE 2 OF 5
Chinese 25 Enable
Chinese 25 Switch to enable Chinese 2 of 5 decoding. Enable
Discrete 25 Enable
Discrete 25 Switch to enable Discrete 25 decoding. Enable
Length option Sets the length of the Discrete 2 of 5 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Interleaved 25 Enable
Interleaved 25 Switch to enable Interleaved 2 of 5 decoding. Enable
Length option Sets the length of the Interleaved 2 of 5 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Verify Check Digit
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Disable