Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
126
The Load Server can be specified as an alternate TFTP server to retrieve firmware files in the Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G product specific configuration in Cisco Unified Communications Manager Administration.
To install the firmware on Cisco Unified Communications Manager Express, extract the contents of the TAR file and upload
into the router’s flash. Each file will need to be enabled for TFTP download. Configure the phone load and reset the phones to
upgrade the firmware.
7925G & 7925G-EX Example:
tftp-server flash: CP7925G-1.4.5.3.LOADS
tftp-server flash:APPSH-1.4.5.3.SBN
tftp-server flash:GUIH-1.4.5.3.SBN
tftp-server flash:JSYSH-1.4.5.3.SBN
tftp-server flash:JUIH-1.4.5.3.SBN
tftp-server flash:SYSH-1.4.4.1.SBN
tftp-server flash:TNUXH-1.4.5.3.SBN
tftp-server flash:TNUXRH-1.4.5.3.SBN
tftp-server flash:WLANH-1.4.5.3.SBN
!
telephony-service
load 7925 CP7925G-1.4.5.3.LOADS
7926G Example:
tftp-server flash: CP7926G-1.4.5.3.LOADS
tftp-server flash:APPSS-1.4.5.3.SBN
tftp-server flash:GUIS-1.4.5.3.SBN
tftp-server flash:JSYSS-1.4.5.3.SBN
tftp-server flash:JUIS-1.4.5.3.SBN
tftp-server flash:SYSS-1.4.5.3.SBN
tftp-server flash:TNUXS-1.4.5.3.SBN
tftp-server flash:TNUXRS-1.4.5.3.SBN
tftp-server flash:WLANS-1.4.5.3.SBN
tftp-server flash: EA15FW-BF3-220.SBN
!
telephony-service
load 7925 CP7926G-1.4.5.3.LOADS
Web Interface
The phone firmware can be upgraded via the web interface by navigating to Phone Upgrade and browsing to the firmware TAR
file.
In order to access the Phone Upgrade menu, the web access must be set to Full.

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g