Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
97
After selecting Export, import the certificates into the RADIUS server and enable them in the Certificate Trust List (CTL).
For the user installed certificate method, select Install on the main certificates page, which will launch the installation wizard.
To generate the certificate signing request, enter the certificate information and import the certificate from the Certificate
Authority (CA) server that is signing the certificate. The signing CA root certificate is used for validation purposes to ensure
that the user certificate was indeed signed by the correct CA.
The Common Name defaults to a string including the MAC address of the Cisco Unified Wireless IP Phone 7925G, 7925G-EX
or 7926G (CP-7925G-SEP<MAC_Address>), however the Common Name can be customized to a string with up to 32
characters.
Some special characters (e.g. ! @ # $ % ^ & * _ [ ] { } \ | ; “ < > ` ~) are not supported for the Common Name.
Organization, Organization Unit, City, and State fields can support up to 64 characters.
Browse to the Certificate Authority certificate that will be signing the user certificate then select Submit.
If using a CA configuration where one or more intermediate servers exist, ensure you upload the correct CA server certificate as
this certificate will be used to validate whether the user certificate was signed by the intended CA or not.
Ensure that the signing CA server certificate uploaded is in DER format.
Only certificates with a key size of 1024 or 2048 are supported.
Ensure the CA server certificate is signed using the SHA-1 algorithm as the SHA-2 (SHA-224, SHA-256, SHA-384, SHA-512)
and SHA-3 signature algorithms are not supported.
Certificates dated January 1 2038 and later are not supported.
Additional extensions in the CA server certificate such as information for certificate renewal and Certificate Revocation List
(CRL) are not supported and can lead to certificate installation failures.

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g