Cisco ASR 5000 Series

Contact Cisco TAC for additional assistance when assessing the impact to system configurations when
enabling the Demux on MIO/UMIO/MIO2 feature.
Important
Configuration
For releases prior to 15.0, to configure a DPC/UDPC as a demux card enter the following CLI commands:
configue
require demux card
end
For release 15.0+, to configure a DPC/UDPC as a demux card enter the following CLI commands:
configue
require demux processing-card
end
For release 18.0+, to configure a DPC/2UDPC2 as a demux card enter the following CLI commands:
configue
require demux processing-card
end
To configure an MIO/UMIO/MIO2 as a demux card enter the following CLI commands:
configue
require demux management-card
end
ASR 5500 System Administration Guide, StarOS Release 21.4
82
System Settings
Configuration