Cisco ASR 5000 Series

bulkstats
confd-user NETCONF
rest certificate rest-cert
#exit
subscriber default
exit
aaa group default
#exit
gtpp group default
#exit
#exit
end
Notes:
•
bulkstats, confd-user, and rest are optional. Just configuring server confd enables NETCONF support.
Verifying the Configuration
There are two Exec mode show commands that display information about the NETCONF-ConfD configuration.
show confdmgr Command
This command displays information about the StarOS ConfD Manager (confdmgr) process.
The syntax for this command is:
show confdmgr [ confd { cdb | netconf | state } | model { bulkstats | confd } | subscriptions ] [ | { grep
grep_options | more } ]
Notes:
•
The confd keyword displays information about the ConfD engine based on the specified keyword in
the following options:
◦
cdb displays ConfD CDB information
◦
netconf displays NETCONF state information
◦
state displays current ConfD state information
•
The model keyword displays information about the ConfD model based on the specified keyword in
the following options:
◦
bulkstats bulk statistics configuration and operational data
◦
confd server ConfD configuration
•
The subscriptions keyword displays ConfD CDB subscription information.
show confdmgr
See below for a sample output for show confdmgr:
[local]<host_name># show confdmgr
State Information
-----------------
State Started
ASR 5500 System Administration Guide, StarOS Release 21.4
417
NETCONF and ConfD
Verifying the Configuration