Cisco Catalyst 2960-XR Configuration Guides

Example: Verifying PIM Stub Routing 71
Example: Manually Assigning an RP to Multicast Groups 72
Example: Configuring Auto-RP 72
Example: Defining the IP Multicast Boundary to Deny Auto-RP Information 72
Example: Filtering Incoming RP Announcement Messages 72
Example: Preventing Join Messages to False RPs 73
Example: Configuring Candidate BSRs 73
Example: Configuring Candidate RPs 74
Where to Go Next 74
Additional References 74
Feature History and Information for PIM 75
CHAPTER 5 Configuring SSM 77
Finding Feature Information 77
Prerequisites for Configuring SSM 77
Restrictions for Configuring SSM 78
Information About SSM 79
SSM Components Overview 79
SSM and Internet Standard Multicast (ISM) 79
SSM IP Address Range 80
SSM Operations 80
IGMPv3 Host Signalling 80
SSM Mapping 81
Static SSM Mapping 81
DNS-Based SSM Mapping 81
How to Configure SSM 82
Configuring SSM 82
Configuring Source Specific Multicast Mapping 83
Configuring Static SSM Mapping 84
Configuring DNS-Based SSM Mapping 85
Configuring Static Traffic Forwarding with SSM Mapping 87
Monitoring SSM 89
Monitoring SSM Mapping 89
Where to Go Next 89
Additional References 90
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
vi OL-29426-01
Contents

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C