Cisco Catalyst 2960-XR Configuration Guides

Feature History and Information for SSM 91
CHAPTER 6 Configuring IP Multicast Routing 93
Finding Feature Information 93
Prerequisites for IP Multicast Routing 93
Restrictions for IP Multicast Routing 94
Information About IP Multicast Routing 94
Multicast Boundaries 94
Default IP Multicast Routing Configuration 95
How to Configure Basic IP Multicast Routing 96
Configuring Basic IP Multicast Routing 96
Configuring an IP Multicast Boundary 98
Configuring sdr Listener Support 100
Enabling sdr Listener Support 100
Limiting How Long an sdr Cache Entry Exists 101
Monitoring IP Multicast Routing 102
Configuration Examples for IP Multicast Routing 103
Example: Configuring an IP Multicast Boundary 103
Where to Go Next 103
Additional References 104
Feature History and Information for IP Multicast Routing 105
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29426-01 vii
Contents

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C