Cisco Catalyst 3120

Index
IN-9
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
default configuration (continued)
private VLANs
15-6
RADIUS 7-20
RIP 38-21
RMON 30-3
RSPAN 29-11
SDM template 8-4
SNMP 32-6
SPAN 29-11
SSL 7-45
standard QoS 36-30
STP 17-13
switch stacks 5-21
system message logging 31-4
system name and prompt 6-15
TACACS+ 7-13
UDLD 28-4
VLAN, Layer 2 Ethernet interfaces 12-20
VLANs 12-8
VMPS 12-30
voice VLAN 14-3
VTP 13-7
WCCP 43-5
default gateway 3-10, 38-12
default networks 38-84
default routes 38-84
default routing 38-3
deleting VLANs 12-10
denial-of-service attack 25-1
description command 10-21
designing your network, examples 1-16
desktop template 5-11, 8-1
destination addresses
in IPv4 ACLs
34-12
in IPv6 ACLs 35-6
destination-IP address-based forwarding,
EtherChannel
37-8
destination-MAC address forwarding, EtherChannel 37-8
detecting indirect link failures, STP 19-8
device discovery protocol 26-1, 27-1
device manager
benefits
1-2
described 1-2, 1-5
in-band management 1-6
requirements xliv
DHCP
Cisco IOS server database
configuring
21-14
default configuration 21-9
described 21-6
enabling
relay agent
21-11
server 21-10
DHCP-based autoconfiguration
client request message exchange
3-4
configuring
client side
3-4
DNS 3-6
relay device 3-7
server side 3-5
server-side 21-10
TFTP server 3-6
example 3-8
lease options
for IP address information
3-5
for receiving the configuration file 3-5
overview 3-3
relationship to BOOTP 3-4
relay support 1-5, 1-12
support for 1-5
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database