48-5
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Chapter 48 Configuring Online Diagnostics
Running Online Diagnostic Tests
Running Online Diagnostic Tests
After you configure online diagnostics, you can manually start diagnostic tests or display the test results.
You can also see which tests are configured for the switch or switch stack and the diagnostic tests that
have already run.
These sections describe how to run online diagnostic tests:
• Starting Online Diagnostic Tests, page 48-5
• Displaying Online Diagnostic Tests and Test Results, page 48-6
Starting Online Diagnostic Tests
After you configure diagnostic tests to run on the switch, use the diagnostic start privileged EXEC
command to begin diagnostic testing.
Use this privileged EXEC command to manually start online diagnostic testing:
After starting the tests, you cannot stop the testing process.
This example shows how to start a diagnostic test by using the test name:
Switch# diagnostic start switch 2 test TestInlinePwrCtlr
This example shows how to start all of the basic diagnostic tests:
Switch# diagnostic start switch 1 test all
Command Purpose
diagnostic start switch number
test {name | test-id | test-id-range
| all | basic | non-disruptive}
Start the diagnostic tests.
The range for the switch number keyword is from 1 to 9.
You can specify the tests by using one of these options:
• name—Enter the name of the test. Use the show diagnostic content privileged EXEC
command to display the test ID list.
• test-id—Enter the ID number of the test. Use the show diagnostic content privileged
EXEC command to display the test ID list.
• test-id-range—Enter the range of test IDs by using integers separated by a comma
and a hyphen. For more information, see the diagnostic start command in the
command reference for this release.
• all—Use this keyword when you want to run all of the tests.
• basic—Use this keyword when you want to run the basic test suite.
• non-disruptive—Use this keyword when you want to run the non-disruptive test
suite.
To Next Page
Loading...
Need help?
General