Cisco Catalyst 3120

Contents
xxxvi
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Advertising Network 0.0.0.0 to DVMRP Neighbors 44-44
Responding to mrinfo Requests 44-45
Configuring Advanced DVMRP Interoperability Features 44-45
Enabling DVMRP Unicast Routing 44-46
Rejecting a DVMRP Nonpruning Neighbor 44-47
Controlling Route Exchanges 44-49
Limiting the Number of DVMRP Routes Advertised 44-49
Changing the DVMRP Route Threshold 44-49
Configuring a DVMRP Summary Address 44-50
Disabling DVMRP Autosummarization 44-52
Adding a Metric Offset to the DVMRP Route 44-52
Monitoring and Maintaining IP Multicast Routing 44-53
Clearing Caches, Tables, and Databases 44-53
Displaying System and Network Statistics 44-54
Monitoring IP Multicast Routing 44-55
CHAPTER 45 Configuring MSDP 45-1
Understanding MSDP 45-1
MSDP Operation 45-2
MSDP Benefits 45-3
Configuring MSDP 45-4
Default MSDP Configuration 45-4
Configuring a Default MSDP Peer 45-4
Caching Source-Active State 45-6
Requesting Source Information from an MSDP Peer 45-8
Controlling Source Information that Your Switch Originates 45-9
Redistributing Sources 45-9
Filtering Source-Active Request Messages 45-11
Controlling Source Information that Your Switch Forwards 45-12
Using a Filter 45-12
Using TTL to Limit the Multicast Data Sent in SA Messages 45-14
Controlling Source Information that Your Switch Receives 45-14
Configuring an MSDP Mesh Group 45-16
Shutting Down an MSDP Peer 45-16
Including a Bordering PIM Dense-Mode Region in MSDP 45-17
Configuring an Originating Address other than the RP Address 45-18
Monitoring and Maintaining MSDP 45-19