CHAPTER 9
Monitoring the Cisco cBR Chassis
• Monitoring the Cisco cBR Chassis Using CLI, on page 161
Monitoring the Cisco cBR Chassis Using CLI
• show platform—Verify if the installed cards are in Ok or Inserted state.
Router# show platform
Chassis type: CBR-8-CCAP-CHASS
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
1 CBR-CCAP-LC-40G ok 03:22:58
1/1 CBR-RF-PIC ok 03:19:40
SUP0 CBR-CCAP-SUP-160G inserted 03:22:58
R0 ok, active
F0 ok, active
4 ok, active
4/1 CBR-SUP-8X10G-PIC ok 03:20:30
P0 PWR-2KW-DC-V2 ok 03:21:20
P1 PWR-2KW-DC-V2 ok 03:21:20
P2 PWR-2KW-DC-V2 ok 03:21:20
P3 PWR-2KW-DC-V2 ok 03:21:20
P4 PWR-2KW-DC-V2 ok 03:21:20
P5 PWR-2KW-DC-V2 ok 03:21:20
P10 CBR-FAN-ASSEMBLY ok 03:21:10
P11 CBR-FAN-ASSEMBLY ok 03:21:10
P12 CBR-FAN-ASSEMBLY ok 03:21:10
P13 CBR-FAN-ASSEMBLY ok 03:21:10
P14 CBR-FAN-ASSEMBLY ok 03:21:10
• show platform hardware slot slot serdes status—Verify if all the links are in locked state.
Router# show platform hardware slot F1 serdes status
Slot R1-Link A
RX link locked
58-bit scrambler, 20 Gbps
0 Overruns, 0 Underruns
0 Reframe, 0 Disparity
0 Out of band, 0 Illegal control codes
Slot 3-Link A
RX link locked
58-bit scrambler, 20 Gbps
Cisco Converged Broadband Routers Hardware Installation Guide
161